Valves & Actuators

Sourced to specification and supplied across Saudi Arabia

Each item below sets out the specification a supplier needs from you before a quotation means anything — the dimensions, ratings, standards and duty that decide which product is actually correct. Work through the one you need, then send the requirement.

• Ball ValvesBall valves are the default choice for isolation duty: quarter-turn operation, tight shutoff and low pressure drop when full bore. Selection turns on three decisions that buyers…
• Butterfly ValvesButterfly valves give isolation and some throttling capability in a fraction of the weight and face-to-face length of a gate valve, which makes them the practical choice on…
• Control ValvesA control valve is sized on process data, not on line size, and fitting one to the pipe diameter is the most common and most expensive specification error. The valve must be…
• FlangesFlanges are ordered against four things at once: size, pressure class, facing and material — and the bolt circle must match the mating flange exactly, which is why the standard…
• Gate ValvesGate valves are isolation-only valves: fully open or fully closed, never throttled, because a partially open gate suffers seat erosion and disc vibration. They give a…
• Pipe FittingsFittings are specified by the way they are joined before anything else, because butt weld, socket weld and threaded fittings are dimensioned to different standards and are not…
• Solenoid ValvesSolenoid valves switch flow electrically and are specified far more often by their electrical and duty characteristics than by their size. Direct-acting designs work from zero…
• Check ValvesCheck valves prevent reverse flow without any external actuation, which makes them simple to buy and easy to specify wrongly. The failure people meet in service is slam: when a…
• Globe ValvesGlobe valves are the throttling counterpart to the gate valve: the seating surfaces close perpendicular to the flow, so the valve can sit part-open for long periods without the…
• Pressure Relief ValvesA pressure relief valve is a safety device, and it is sized from the relieving scenario rather than from the line — fire case, blocked outlet, thermal expansion and control…
• Needle ValvesNeedle valves give fine flow regulation and reliable isolation on small-bore instrument and sampling lines, where a quarter-turn valve would be too coarse and a large valve…
• Plug ValvesPlug valves use a tapered or cylindrical plug rather than a ball, and earn their place on dirty, viscous or solids-bearing service where a ball valve cavity would pack and seize.…