Sourced and supplied across Saudi Arabia
Solenoid valves switch flow electrically and are specified far more often by their electrical and duty characteristics than by their size. Direct-acting designs work from zero differential pressure, while pilot-operated designs are cheaper and more compact but need a minimum pressure difference to open — installing one on a low-differential line is a common cause of a valve that simply will not shift. Coil duty rating matters wherever the valve stays energised for long periods.
The more of this you send, the closer the first quotation lands.
| Port size and connection | 1/4 in to 2 in, threaded NPT or BSP, or flanged |
|---|---|
| Operation | Direct acting or pilot operated |
| Function | 2-way, 3-way or 4-way; normally open or normally closed |
| Differential pressure | Minimum and maximum, and whether zero differential is required |
| Media | Air, water, steam, fuel gas, or aggressive chemical |
| Body material | Brass, 316 stainless, or plastic |
| Seal material | NBR, EPDM, FKM, or PTFE, chosen for the media |
| Coil voltage | 24 VDC, 110 VAC, 220 VAC |
| Coil duty | Continuous duty required if energised for long periods |
| Ingress protection | IP65 or IP67 for outdoor use |
| Hazardous area certification | ATEX/IECEx zone and protection type if required |
| Temperature | Media and ambient |
Select one and it travels with your enquiry. Not sure? Leave it and describe the application instead.
We source to specification. Send your requirement and we will come back with options, lead time and pricing.